XP Power extends line-up of miniature board mounted LED drivers

The LDU20 series provides up to 700 mA output current, and the LDU05, 07 and 14 series has a maximum output of 1000 mA. The drivers can accommodate a very wide range of input voltage from 7 – 30 VDC, which needs to be at least 2 V higher than the output.

Dimming options include two analog methods (voltage or resistance) and a pulse width modulation (PWM) input signal. The PWM approach has a maximum operating frequency of 1 kHz, with a minimum 200 ns on/off time. When using an analog dimming method the output current range can be adjusted from 25% to 100% of nominal current.

A remote on/off control input provides the designer the ability to control the output or sequence the start-up. All models provide protection in the event of a short or open circuit of the LED device.

The LDU series suit a broad range of indoor, outdoor, underwater and automotive LED lighting application and are also suitable for battery powered applications.

XP Power

Check Also

Analog Devices at Enlit Europe 2021

From 30th November to 2nd December 2021, Analog Devices (ADI) will participate in Enlit Europe, …