Very Compact 2 x 4in Single Output Power Supplies provide up to 300W

Leading power supply specialist, Powersolve, announces a series of compact, single output AC-DC power supplies designed to provide as much as 300W output. They a wide operating temperature range of -30⁰ to +85⁰C (with some derating). The six model PSY300 series are open baseplate units with a tiny 2 x 4in (50.8 x 101.6mm) footprint and a height of 1.31in (33.5mm).

Operating from a wide 90 to 264VAC input range with active PFC, models in the PSY300 series provide single fixed output voltages of 12V, 18V, 24V, 30V, 48V or 54V DC, providing up to 150W convection cooled, 180W conduction cooled through baseplate and 250W with fan cooling. With both conduction and forced air cooling, a PSY300 unit can give up to 300W output power. A 12V, 0.3A fan supply is a standard feature.

PSY300 units are efficient (up to 92%) and feature a no load power consumption figure of 0.15W without fan.  The power supplies are protected against short circuit, over current, over voltage and over temperature.

The units have a high capacitive load capability, are suitable for Class I and Class II operation and feature an extra low leakage current figure of less than 100µA.

The PSY300 series meet all relevant EMI radiated and conducted standards and have a number of safety approvals pending. Powersolve can also supply models with any output voltages from 9V to 57VDC, still within the safety approvals, but these may be subject to minimum order quantities.




Check Also

Power Integrations Bundles New Three-Phase BLDC Control Software into Motor-Expert Suite for BridgeSwitch IC Family

Hardware-Software Solution for Three-Phase BLDC Motor Inverters Enables Greater Than 98 Percent Efficiency, Saves PCB …