Panasonic high power SOP PhotoMOS

The new high-current series of PhotoMOS relays from Panasonic Electric Works permits non-wearing, silent, reliable switching within the smallest spaces. The unlimited number of switching cycles of the PhotoMOS is particularly beneficial where the service lives of electromechanical or reed relays fall short of requirements. The new PhotoMOS relays permit switching voltages up to 100V (AC&DC) and continuous load currents up to 3.3A. In DC-only mode (parallel configuration of MOSFET transistors at the output) up to 6.6A is even possible at room temperature.

PhotoMOS relays with even more power in the tightest spaces. Panasonic doubles the load current in the SOP6 package

The key data at a glance:

 

Load voltage (peak AC DC) [V]

Load current [A]

On-resistance [O]

I/O insulation [kV]

Package

AQV252G3S

60

3.3

0.033

1.5

SOP6

AQV255G3S

100

2.2

0.07

The low on-resistance and resultant little variation across the temperature range also opens up numerous potential applications in measurement and testing, especially where a consistent loop resistance or limiting voltage drop at the switching contact is vital. Other typical applications are in automation, safety engineering and building automation, enabling input and output units featuring virtually infinite lifecycles and absolute maintenance-free operation to be realised with minimal actuation power.

 

www.panasonic-electric-works.co.uk

Check Also

E-Design Webinars: Greenliant present ‘Capabilities of SSDs for Aerospace & Industrial Markets’

Astute is pleased to announce the first ‘In Partnership’ webinar with memory franchise, Greenliant. 15 …