VPG has announced that its Powertron resistor brand has introduced the first seven devices in its S Series of precision foil current sense resistors. Offering a TCR of ±2 ppm/°C , believed to be the industry’s lowest for high-power current shunts, the SHR, SHS, SNR, and SPR devices provide power ratings to 80 W in a variety of epoxy packages.
The resistors offer a wide range of power ratings, from 1.5 W in free air to 80 W when mounted on a heatsink, with low resistance values from 0.002 O to 50 O and tight tolerances to ±0.1%. The devices feature maximum currents to 150 A, with higher values available upon request; very low inductance; thermal EMF of <1 µV/°C ; and a temperature range of -40 °C to +130 °C.
Providing exceptional load-life stability of ±0.1% typical after rated power at 70°C for 2,000 hours, S Series resistors provide highly accurate and reliable current sensing in power supplies, digital multimeters, current control systems, medical equipment, solar and wind inverters, AC/DC converters, and battery chargers. The RoHS-compliant devices are available in a wide range of package sizes, including the standard TO-220 and surface-mount version.
“Several years ago Powertron decided to focus on developing resistive current sense devices with Kelvin connections that would allow quick and accurate current measurements,” said Yuval Hernik, senior director of application engineering for VFR. “Current sensing circuits provide the data control that circuits need to operate properly, and foil resistors are among their fundamental building blocks. In the typical application, a controlling circuit monitors current flowing through a current sense resistor as a voltage drop across the resistor and directs parameter changes to ensure that optimum circuit performance is maintained.”
Every current sense resistor must have an error budget assigned to it. If this budget is exceeded, equipment will fall out of its performance specification, or possibly fail. In addition to initial tolerance, the error budget includes allowable shifts through shelf life, assembly, TCR, shock, vibration, thermal shock, thermal EMF, and load-life drift. Designers then need to select a particular resistor technology with the least amount of change through all the stresses, add up all the expected ?Rs, and subtract these from the end-of-life tolerance limit to arrive at the purchase tolerance. This needs to be kept in mind when considering the overall long-term costs of a system, and the consequences of attempting to save on upfront assembly costs.
Precision current sense resistors with the same resistance, tolerance, and TCR — but of different technologies — are not interchangeable, as the changes through their service life are not the same. Substitution on the basis of these alone could jeopardize performance and mission success.