Kaman Measuring highlights digiVIT and Digital DIT at Sensors Expo and Conference

The Measuring Division of Kaman Precision Products, Inc., a world leader in the design and manufacture of high-performance, precision non-contact position measuring systems, announces it will highlight its complete range of inductive eddy current technology at Sensors Expo and Conference, which will be held from June 26-28, 2018 at the McEnery Convention Centre, in San Jose, CA, Booth #1217. Stop by the booth to see demonstrations of the digiVIT Digital Variable Impedance Transducer and new Digital Differential Impedance Transducer (Digital DIT).

The digiVIT features a self-tuning bridge that can work with nearly any sensor and any conductive target. The transducer also features simple pushbutton calibration, temperature compensation, and zeroing. Its embedded intelligence ensures that all functions are accessible, with no need to connect to a PC to download a configuration file when changing sensors or performing high level calibrations.

Kaman’s Digital DIT is designed to provide a digital interface for high speed eddy current measurement systems, with resolution in the micro-inch range, at bandwidths as high as 60 kHz. Kaman’s custom sensors, signal processing, analog to digital converter, and custom calibration system are used to deliver each high precision Digital DIT sensor system. Available in different configurations to tailor the measurement system to the application, each system is calibrated to the application to provide optimum performance and system validation.

The Digital DIT provides a standard serial peripheral interface (SPI) or direct access for high speed communication performance. Using a digital interface like the Digital DIT provides advantages in measurement system integrity over analog systems.For applications that require a digital output, using the SPI bus provides a standardised method to communicate with most embedded controllers, and it can be multiplexed with other devices.

Kaman will also be exhibiting numerous sensors based on our core technology. On display will be a variety of general purpose sensors like the KD-2446, KD-2306, and KDM-8206, as well as high-performance sensors better suited for particular applications, such as the SMT-9700, a high resolution OEM analog unit available in 1, 2, or 3 channel configurations. Also to be displayed are Extreme Environment sensors for high pressure, low temperature, and high temperature applications.

www.kamansensors.com

Check Also

Microchip Simplifies Deployment of Wi-Fi 6 Access Points and Small Cell Nodes with First Multiport, Multigigabit PoE Injector

Organisations can only deploy today’s Wi-Fi 6 access points (APs) and 5G small cell access nodes …