DC/AC inverters from Powersolve use latest inversion technology to provide up to 4500VA and ECO working mode

Powersolve has announced a series of Sine Wave DC/AC inverters that provides between 1000 and 4500VA from a DC input between 40 to 60VDC. This makes them ideal for 48VDC – based telecoms systems.

 

There is a total of five models in the PJN Series each designed around the latest high efficiency Sinusoidal PWM (SPWM) inversion technology and all incorporating an energy-saving ECO working mode. All five models provide 230VAC ±2 per cent (±15 per cent in ECO Mode) and offer power outputs of 1000, 1500, 2000, 3000 or 4500VA. Output frequency is 50Hz ±0.5 per cent. The 3kVA unit is available with optional N+1 redundancy.

 

Designed for front-end maintenance, each inverter incorporates alarms for battery low and inverter failure and protection against over-voltage, overload, short circuit, over temperature and utility bypass. Front panel LEDs indicate inverter, battery and fault conditions while an RS232 interface provides communications.

 

The 1000VA and 1500VA units are housed in a 1U high 19in rack enclosure. The 2000VA and 3000VA are 2U while the 4500VA comes in a 440 x 440 x 3U case. AC Input connector is via screw terminals while output connection is by IEC and screw terminals.

 

The PJN series meets all relevant safety and EMC standards.

 

www.powersolve.co.uk

Check Also

How the right environment can optimise X-Ray inspection performance

By Luke Bower This case study looks at the role of the ‘human factor’ in …