Convection cooled 60 W DC-DC converter achieves 92% efficiency

The single output JCK60 series accommodates a 2:1 input voltage range and includes under-voltage lockout. Models are available with either a 24 VDC (18 – 36 VDC) or 48 VDC (36 – 75 VDC) nominal input, and outputs cater for the popular voltages of 3.3, 5, 12 or 15 VDC.   An output trim function allows the adjustment of output voltage of +/- 10% of nominal and remote sense compensates for drops in voltage at the load.

The converter is capable of operating in most environments and across a wide range of temperatures from – 40 to + 85 degrees C. Full output power is available up to + 40 degrees C without derating.

A remote on/off input provides an external control of the output and can be used to sequence start-up procedures. Overvoltage, overload and continuous short circuit protection features are standard across the range. All models have an input to output and input/output to case isolation of 1,600 VDC.

The units meet EN55022 level A conducted and radiated emissions with no external components necessary.

The JCK60 is available from Farnell, element14, approved regional distributors, or direct from XP Power and comes with a 3 year warranty.

XP Power

Check Also

400W 3” x 5” medical and industrial power supplies deliver 250W convection/conduction cooled with 400W peak power for extended time periods

TDK Corporation (TSE:6762) announces the introduction of the TDK-Lambda brand CUS400M medical and industrial certified …