Power

Flex announces the PKU4116HD series 1/16th brick DC/DC converter for RFPA and PoE applications

Flex Power Modules is introducing its PKU4116HD through-hole DC/DC converter, with 36-60 V input (80 V peak) and fully-regulated 55 V output. The open-frame module is in the industry-standard 1/16th brick format, 33.02mm x 22.86mm x 9.8mm, and is rated at 110 W/2 A output to 50°C ambient with natural …

Read More »

Inseto invests in wedge bonder and launches two training courses

Inseto, a technical distributor of equipment and materials, has invested in a Kulicke & Soffa (K&S) Asterion wedge bonder. Located in Inseto’s Process Development Laboratory along with materials test and plasma cleaning equipment, the automatic bonder is suitable for the large-wire, fine-wire and ribbon bonding of hybrid circuits, semiconductor devices, …

Read More »

EPC expands 40 V eGaN FET product line

Efficient Power Conversion Corporation, a leader in enhancement-mode gallium nitride on silicon (eGaN) power FETs and ICs, has advanced the performance capability of low voltage, off-the-shelf gallium nitride transistors with the introduction of the EPC2069 (1.6 mΩ typical, 40 V) eGaN FET. The EPC2069 is suitable for applications with demanding requirements …

Read More »

Zero Carbon Solution launched with the LoRa Edge Platform and a RE Microcontroller

Semtech Corporation, a supplier of high performance analog and mixed-signal semiconductors and advanced algorithms, and Ryoden Corporation, a key LoRa ecosystem solution and network provider, have announced a new zero carbon solution with a RE Family Microcontroller from Renesas. The solution features a Renesas RE Family microcontroller (MCU) to connect …

Read More »

LIF Series offers energy- and cost-efficient solution for DIN-rail mounting

Lightweight and compact ac-dc converters by Mornsun are the latest high-reliability, low noise ac-dc converters available from Relec Electronics. The LIF120 R2, LIF240 R2 and LIF480 R2 din rail mount ac-dc converters are all IEC/EN/UL62368, UL61010, UL508-approved for global use, and have a universal input range of 85 – 264VAC …

Read More »

For high operating temperatures up to +155°C: Commercial IHLP® inductor in 7575 package from Vishay at Rutronik

Convincing parameters: Intended for computer, telecommunications and industrial applications, Vishay Dale‘s IHLP 7575GZ-51 inductor offers up to 30% smaller DCR values and up to 35% higher current-carrying capacity compared to components in the 6767 package. It also offers a 50% cost savings potential compared to those in the 8787 package. …

Read More »

Gowanda Electronics launches non-magnetic RF inductor series – 28MG

Gowanda Electronics, a designer and manufacturer of high-performance inductors and magnetic components for demanding RF and power applications, has introduced a new non-magnetic RF thru-hole (leaded) inductor series – 28MG. This series is suitable for use in medical imaging equipment and other applications where magnetic materials must be avoided. Gowanda’s …

Read More »

300W and 1,000W programmable electronic DC loads offer multiple operating modes, high-speed response times and linear start-up from 0V

TDK Corporation has introduced the TDK-Lambda brand SFL series of programmable electronic DC loads. The series comprises 300W and 1,000W power levels and either a 120V or 500V maximum rating. The SFL incorporates high-speed current feedback control to eliminate load current overshoot and oscillation to generate a stable and predictable …

Read More »

Wide 85-305VAC input AC-DC power supplies for embedded applications from 15W to 320W

XP Power has introduced the LCW series of regulated output cased AC-DC power supplies that is suitable for embedded industrial electronics, technology and equipment requiring household approvals. The nine new series (LCW15, LCW25, LCW35, LCW50, LCW75, LCW100, LCW150, LCW200 and LCW320) offer power levels from 15W to 320W. All models …

Read More »

Higher current-carrying capability for lower BOM: Infineon StrongIRFET™ 2 Power MOSFETs in Rutronik‘s power portfolio

Parallel connection of multiple devices becomes unnecessary: The new StrongIRFET™ 2 power MOSFETs in 80 V and 100 V are the latest generation of Infineon‘s MOSFET technology for a wide range of applications and are suitable for both low and high switching frequencies. This new technology offers 40 percent improved …

Read More »