150 W DC-DC converter suits micro cell transmitter and power amplifier applications

Murata Power Solutions has launched the PAQ series of 150 Watt isolated DC-DC converters. Packaged as an industry standard open-frame quarter brick module with through-hole mounting, the converter has a 2:1 input range of 36 – 75 VDC around a nominal 48 VDC input. The single 29.8 VDC nominal output can be trimmed from 23.83 (-20%) to 32.78 (+10%)VDC in order to accommodate an application’s specific voltage requirements.

A highly efficient DC-DC converter, typically 92.5%, it can deliver up to 5 Amps output current from the fully regulated output. An optional base plate is available for use in conduction-cooled designs such as sealed box RF power amplifiers that are often mounted on radio masts. For these applications the converter and base plate are fixed directly to the host equipment chassis. In this way the operation of end-equipment is efficiently maintained despite being situated in a potentially demanding physical environment. The high efficiency of the PAQ converter greatly assists in reducing operating costs due to less waste power being generated and helps maintain the unit’s reliability.

Protection features include output over voltage, over current protection, input under voltage and over temperature shutdown. A remote On/Off control option offers negative or positive logic input. Input / Output isolation is provided by 2,250 VDC Basic insulation.

The PAQ is suited for use in a broad range of radio frequency power amplifier applications such as telecommunications infrastructures, CATV systems, satellite communications, RF test and MRI imaging equipment.

With its 150 Watt power output rating, the PAQ series can be used with latest generation of micro cell transceivers and indoor Wi-Fi installations.

www.murata.eu

 

Check Also

400W 3” x 5” medical and industrial power supplies deliver 250W convection/conduction cooled with 400W peak power for extended time periods

TDK Corporation (TSE:6762) announces the introduction of the TDK-Lambda brand CUS400M medical and industrial certified …