“Floating output” FL Series from Glassman breaks new ground in DC power supply technology

New from Glassman Europe the 1.5kW FL Series ‘Floating Output’ high voltage programmable DC power supplies feature fully floating outputs which can be biased as either positive or negative output supplies. The FL provides high power density of 1.5KW in a 1U package, which has not been typically seen in power supplies above 600V and will allow design engineers greater flexibility, particularly when space is at a premium. The FL Series has been designed to be robust and can withstand demanding industrial applications such as plasma coating or ion sources, together with laboratory environments of all kinds.

Available in 750Vdc, 1000Vdc, 1250Vdc and 1500Vdc variants, FL series power supplies include a universal (90 – 264Vac) input. Either output terminal can be grounded for operation as a positive or negative supply. Front panel digital encoders provide high resolution local adjustment of voltage and current program. The embedded microcontroller and built-in RS-232, RS-485 and USB communications – a standard feature on all models in the series – provides remote control programming and monitoring with 12 bit accuracy. Ethernet is also available as an option. Full analogue capability has been retained and the user can select 0-5V or 0-10V analogue programming and monitors if desired.

The FL Series 1U rack mount power supplies save space as they can be stacked directly one on top of the other should increase output power be required. Up to four identical units can be field strapped for parallel operation with a user configurable master and active current sharing.

Input is 90-264 VAC continuous, single-phase, 48-63Hz. The RMS input current at rated power is less than 20A at 100 VRMS input and less than 11 A at 200 VRMS input. Output power is linearly de-rated from 100% to 90% between 100V and 90V input. Inrush current is 30A maximum peak, 90 to 264 VAC. Output is continuous, stable adjustment, from 0 to rated voltage or current by panel mounted optical rotary encoder or by external, user selectable, 0 to +5V or 0 to +10V signals. Voltage accuracy is 0.5% of setting + 0.2% of rated. Current accuracy is 0.5% of setting + 0.2% of rated. Voltage and Current programming ranges are selected by switches that are accessible from the rear panel. Optical rotary encoder resolution is 1V and 1mA in fine adjustment mode and 10V and 10 mA in the default coarse adjustment mode.

Compliance with RoHS and CE international standards allows the user to integrate the FL Series into products as an approved component, reducing the burden placed on engineering and compliance departments.

A high power 3kW version is now also available as the 2U rack mountable EV series.

www.glassmaneurope.co.uk

 

Check Also

Toshiba Launches MOSFET Gate Driver Switch Intelligent Power Devices

Toshiba Electronics Europe GmbH has launched two new gate driver switch intelligent power devices (IPDs). …