- 07 February, 2012
Mobile Network Test Seminars - 15 - 16 February, 2012
Southern Electronics - 08 March, 2012
UK Technology Day - 23 May, 2012
ElectroTestExpo
|
Newly released from Murata the DLP11TB series of 0504 chip common mode choke coils have been designed to reduce radiation noise in electronic equipment. The company’s high-precision film inductor forming technology has been used to attain an improved cut-off frequency in the transmission characteristics of these new choke coils compared with previous products.
In the DLP11TB series, Murata has successfully boosted the cut-off frequency of the common mode choke coils to 8GHz or more, enabling USB3.0 SuperSpeed signals to be transmitted at more than satisfactory quality.
The recent debut of SSDs (solid state disks) and other high-speed peripheral devices has led to the formulation of the USB 3.0 standard under which the data transmission speed is increased from the 480 Mbps provided by USB 2.0. USB 3.0 has added the SuperSpeed mode, enabling data to be transmitted at up to 5 Gbps, representing a 10-fold increase over the speed provided by the previous standard. With the increased data transmission speed provided by USB3.0, the signal frequencies have become much higher than with USB 2.0. It's therefore difficult to deal with noise issues while maintaining a satisfactory signal quality using an ordinary common mode choke coil.
The DLP11TB series' small size, just 1.25 x 1.0mm, makes it suitable for use in mobile devices. The devices' cut off frequency has been boosted to more than 8GHz to reduce the effects of noise on signals to the absolute minimum. Features include a high common mode impedance of 80 Ohms at 100MHz and the coils match the characteristic impedance of 90 Ohms from the USB 3.0 standard.
Noise outflow due to mode conversation is minimal.
